Naxos CNC Cylindrical Grinder


Naxos CNC Cylindrical Grinder

Naxos RTLDQY-CNC-S

Age: 1987

Condition: Excellent

Stock Number: 3272


This machine was completely remanufactured to new specifications in 2013 and installed in 2014. It was stripped down to the bare casting, table/base/wheel heads/work head and tailstock and the second z axis ways were fit and rescrapped. New electrical cabinet with all new wiring to the machine and new all components, hydraulic lines, air lines and new cable carriers were added. New Marathon 60HP motors for both grinding wheel heads. (The drives in the cabinet are set for 40 Hp)The spindle drives in the cabinet are Yakawa built in the USA along with the workhead drive servo motor. All new ballscrews and nuts with support brackets for stabilizing the screw under operation. The machine has a new balancing system which monitors both spindle grinding heads constantly during operation and automatically makes corrections if needed.

                                   View a video of Naxos CNC Cylindrical Grinder
Click to view larger photo


SpecificationDescription
Max. swing24.78"
Max. distance Workhead face to tailstock face191"
Max. travel for Z axis (Table)198"
Max. grinding distance for main wheel178"
  
X axis infeed travel for both head stocks28.38"
Max. travel for Z axis second spindle #2107"
Grinding wheel spindle motors (2) Marathon60hp (Drives limited to 40hp)
Apprx. weight between centers9,000 lbs
Tailstock Quill diameter6"
Tailstock stock bodyAir assist for movement
Tailstock bodyHydraulic pressure for quill
Tailstock bodyAdjustment for taper
Tailstock quill taperLive center Mfg. Riden (M3817)
Machine floor space45'4" long x 20'4" deep
Apprx. weight66,000 lbs
Power requirement460/3/60
KVA Requirement118 kva

Equipped With:
Fanuc Oitd Latest control with graphics for both spindles
Communication ports, USB/ RS232/PCMI
MPG (manual pulse generator)
Digital load meters for both grinding spindles
SBS Balancing system in process for both grinding wheel heads
Fanuc servo motors for each axis
Ballscrews each axis
Fagor scales for each axis with positive air pressure
Yaskawa work head servo motor
New electrical cabinet all new components and wiring to all machine motors and accessories
New spindle motors for each grinding head
Coolant tank with paper filtration system
Balancing stand with arbor
(4) four wheel hubs
(2) pillow blocks
Several workhead drive units
Lifting bracket for removal of grinding wheel
Attachment for rough grinding of wheels
Attachment for special dressing applications
Hydraulic unit for each head
Way lubrication system
Air assist for tailstock body travel
Tailstock with taper adjustment, power quill feed, tailstock operator station with forward/reverse and e-stop for quill
Automatic diamond dresser probe (compensate for wear in diamond)
Automatic wheel probe (to read and compensate for width, diameter, taper of wheel )
Automatic dresser for straight wheel
Automatic taper wheel grinding wheel
Apprx. cutting time 2,980 hours


Workhead station operators control, forward, reverse, e-stop




HomeIndexContactView Cart


Naxos CNC Cylindrical Grinder
Machinery Works Inc
420 Technology Way
Saukville, Wisconsin 53080
262-284-5611
sales@machwksinc.com



Asset Sales and Marketing Software for Used and Surplus Industrial Machinery and Equipment Dealers
www.MacDB2000.com